Pro-Line has released a couple of sneak peek images of their upcoming Desert Raid short course body. Continue reading
We hereby decree, “Let there be NO slop!” With the combination of the Dubro/Lunsford setup, your SCTE’s steering system slop and 100% of binding upon compression of the suspension will vanish when compared to stock steering linkages! Go on try… Continue reading
Can you tell me why we are running 1/8 scale linkages on our 1/10 scale trucks!? It’s not needed, and the stock OEM parts wear out way to quickly anyways. Meet the best of both Worlds; with this combo you get the lightness (ounce lighter than OEM) and durability/longevity of USA Made Dubro/Lunsford components. Just what your SCTE has been craving. Continue reading
MIP Pro4mance™ Spring Set: Soft, Med, Firm springs.
TARGET CUSTOMERS:
RC Racer Enthusiast who needs the Optimum rates for all TLR SCTE 1.0, 2.0 & MIP Pro4mance™ Package.
COMPETITIVE ADVANTAGES:
Higher spring rate than stock to give you a wider… Continue reading
This is a pair of ProTrac™ F-11 SC 2.2”/3.0” Bead-Loc wheels. Welcome to the future of Short Course – Meet the new wheel that will take you there: F-11 ProTrac™ Bead-Loc! Continue reading
This is a pair of Pin Point SC Carpet Tires. Indoor Carpet Off-Road Racing is a growing segment of the racing scene and Pro-Line is ready to take over with the new Pin Point SC Tire. Continue reading
MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack is a low rotating mass center drive system made from 7075-T6 Aluminum. This drive system removes half the weight out of the rotating mass, resulting in higher acceleration and deceleration. The New MIP Pucks™ Drive System is like a 10th degree ninja master – whisper quiet with no backlash! With these New MIP Pucks™ Drive System you can sneak up on a cheetah and then out run it down the field!!! Continue reading
MIP introduce the Super Diff rebuild kit for the TLR SCTE 2.0 and MIP Pro4mance converted SCTE trucks. The set fits all trucks that make use of the TLR332001 diff case, it can increases diff life by more than five times Continue reading
MIP introduce the Pro4mance rigid chassis braces for the TLR SCTE 2.0 short course truck. They are made from 7075 aluminium and designed to improve chassis stiffness significantly. The bolt-in braces also do not wear out as the standard plastic parts do, for longer durability and a predictable chassis setup. Continue reading
JConcepts Hi-Flow SCT body is the 2011 and 2012 ROAR National Champion. Most successful SCT body is now available in Light Weight material. Continue reading
This is a 1966 Ford® F-150 Clear Body for SC trucks with extended body mounts. Now you can have your very own custom “Hay Hauler” with Pro-Line’s licensed 1966 Ford® F-150 body! The ’66 F-150… Continue reading
LOSB0115 1/10th XX-SCT Brushless Tuff Country 2WD SCT RTR
Get ready for some high speed slideways action with the new Losi Tuff Country licensed SCT with its high power brushless motor and speed control and its waterproof electronics.
The Losi Tuff Country SCT is based on Losi’s evergreen XXX platform that has stood the tests of time and is ideally suited for taking the knocks and scrapes that comes with SCT racing. Its 3-gear rear motor transmission features a fluid-fillable gear differential and is protected by an adjustable twin disk slipper clutch mechanism. Continue reading
The Hazard wheel by JConcepts has taken the Short Course class by storm. With victories all over the world and back-to-back ROAR National Championships, the Hazard has established itself as the go-to wheel for Short Course racing on the Team Associated SC10, SC10 4×4 and TLR 22 SCT and Losi SCT-E. Continue reading
The TEN-SCTE platform is one of the most successful 4WD electric short course chassis of all time. It has dominated its class at tracks all over the world and proven it has what it takes to win a ROAR National Championship. The TEN-SCTE 2.0 kit builds on the success of this racing juggernaut with innovative engineering and technology born from team driver expertise, CAD and countless hours of testing. Continue reading
This is a True Scale Ford® F-150 Raptor SVT Clear Body for the Slash® 2WD, Slash® 4×4 and SC10 (requires Pro-Line Extended Body Mounts). It is time to man up and go REAL with Pro-Line’s new True Scale Ford® F-150 Raptor SVT truck body for Short Course Trucks! Continue reading
Short Course trucks are very body sensitive. The proper body style, cut-outs, overall weight and roll characteristics can determine a properly handling vehicle. The TLR 22 SCT has a very flexible front and rear body mounts which provides several durability advantages but when it comes to performance, having a sturdy base to the body is critical. Continue reading
Speed Passion introduces two new body shells for shourt course trucks. The Ananta named body is available in two variants as 50 percent pre-decorated and also as clear variant. Continue reading
JConcepts introduce their new line of Silent Speed spur gears for select Team Associated, TLR and Traxxas vehicles such as the SC10, 22SCT and Slash 4×4. The gears are precision machined making them uniquely concentric over standard or molded gears giving the user a consistent gear mesh allowing a more precise adjustment and more silence on the race track. Continue reading
Borrego SC Wheels
DE Racing is proud to introduce the first true dish wheel for the Short Course market. Modeled after our 1/10 buggy line, “Borrego” wheels feature the realistic scale appearance of a beadlock wheel with mud cover. They were also designed for use with our optional sticker disks to give a new level of color customizing. Continue reading