Atomik RC is proud to offer a new standard in power, performance, and reliability with the new Atomik Red 120 Amp Sensored Brushless ESC with 550 7.5T Sensored Brushless Motor Combo. This sensor-based brushless combo is designed for the rigors of electric 1/10th vehicles including 4WD short course trucks and rock crawlers. Continue reading
Pro-Line has released a couple of sneak peek images of their upcoming Desert Raid short course body. Continue reading
The next generation of Pro-Line Shock Technology has arrived: Pro-Line Pro-Spec Shocks! Every last detail has been refined to give you the best performing and best looking Shocks ever made. Continue reading
AKA has introduced the wide Short Course Slingshot tire that sports a very low tread pattern that has been optimized for hard-packed indoor tracks. Its new carcass features a refined wide tread profile that has an exceptional balance between… Continue reading
Designed from the ground up, theRPM Low Center of Gravity front bulkhead for the Traxxas Slash 4×4 & 1/10th scale Rally is here to solve several key issues reported to RPM by our customers. Continue reading
We hereby decree, “Let there be NO slop!” With the combination of the Dubro/Lunsford setup, your SCTE’s steering system slop and 100% of binding upon compression of the suspension will vanish when compared to stock steering linkages! Go on try… Continue reading
Can you tell me why we are running 1/8 scale linkages on our 1/10 scale trucks!? It’s not needed, and the stock OEM parts wear out way to quickly anyways. Meet the best of both Worlds; with this combo you get the lightness (ounce lighter than OEM) and durability/longevity of USA Made Dubro/Lunsford components. Just what your SCTE has been craving. Continue reading
MIP Pro4mance™ Spring Set: Soft, Med, Firm springs.
TARGET CUSTOMERS:
RC Racer Enthusiast who needs the Optimum rates for all TLR SCTE 1.0, 2.0 & MIP Pro4mance™ Package.
COMPETITIVE ADVANTAGES:
Higher spring rate than stock to give you a wider… Continue reading
Traxxas is “The Fastest Name in Radio Control,” and MIP has just thrust that catch phrase closer to reality! In the past, MIP has offered a range of axle designs including steel shaft CVD™’s and heavy steel splined X-duty’s, for… Continue reading
This is a pair of ProTrac™ F-11 SC 2.2”/3.0” Bead-Loc wheels. Welcome to the future of Short Course – Meet the new wheel that will take you there: F-11 ProTrac™ Bead-Loc! Continue reading
This is a pair of Pin Point SC Carpet Tires. Indoor Carpet Off-Road Racing is a growing segment of the racing scene and Pro-Line is ready to take over with the new Pin Point SC Tire. Continue reading
Pro-Line have announced the release of their Pro-2 SC kit combing their highest quality and best performing SC accessories into one box to create the ultimate Short Course Truck. The Pro-2 SC Performance Chassis is 3mm thick Hard Anodized 7075-T6 aluminium and extends the full length of the truck for maximum durability and keeps everything in-line and extremely low for optimum performance. Continue reading
Horizon Hobby introduce the Dynamite Fuze 1/10 4-pole brushless motor and speed controller combos. They include a splash waterproof Fuze 70A speedo that comes pre-wired with EC3 battery and bullet-type motor connectors while an add-on heatsink lowers the ESC’s temperatures when the going gets tough. Continue reading
MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack is a low rotating mass center drive system made from 7075-T6 Aluminum. This drive system removes half the weight out of the rotating mass, resulting in higher acceleration and deceleration. The New MIP Pucks™ Drive System is like a 10th degree ninja master – whisper quiet with no backlash! With these New MIP Pucks™ Drive System you can sneak up on a cheetah and then out run it down the field!!! Continue reading
MIP introduce the Super Diff rebuild kit for the TLR SCTE 2.0 and MIP Pro4mance converted SCTE trucks. The set fits all trucks that make use of the TLR332001 diff case, it can increases diff life by more than five times Continue reading
Pro-Line introduce two new body shells in the form of the Evo SC for 1/10th short course trucks and the Bulldog Gen3 for Kyosho’s RB6 buggy. Starting with the SC body, it is designed to fit many of today’s trucks including the Traxxas Slash, Team Associated SC10, Losi XXX-SCT and SCTE as well as the Kyosho Ultima SC. Continue reading
MIP introduce the Pro4mance rigid chassis braces for the TLR SCTE 2.0 short course truck. They are made from 7075 aluminium and designed to improve chassis stiffness significantly. The bolt-in braces also do not wear out as the standard plastic parts do, for longer durability and a predictable chassis setup. Continue reading
2mm carbon fiber chassis stiffeners for the Team Associated SC10 series of vehicles.
Includes 18 4-40 x 3/16 counter sunk screws
Note: Requires a #43 drill bit and 4-40 tap for install Continue reading
1:10 Scale Ready-To-Run Electric Off Road Race Truck
Featuring the paint scheme of the truck raced by Eric Barron in the Lucas Oil Off Road Racing Series, the Toyota Racing SC10RS is a Ready-To-Run RC short course truck that features… Continue reading
JConcepts Hi-Flow SCT body is the 2011 and 2012 ROAR National Champion. Most successful SCT body is now available in Light Weight material. Continue reading