– In both SC class track classes, it is use * as for 1/10 scales.
･SC class rule
･Li-po 2cells (hard packing)
･The thing that the tire is installed in the body in the bodice kale valuing is used (1/10 sizes).
･Installing and the window pulling out etc. of the decoration driver of LED are free and will be encouraged by me.
･Additional prohibition of wing


– SC (short course track) 2WD
The lowest weight : 2,000g motor: use 540only. but no limit.
The tire: sold for 1/10SC.

– SC 4×4 class
The lowest weight :2,000g motor: It is tire up to 540 classes 6900KV Limit
The tire: sold for 1/10SC.


– Racing track
The lowest weight 1,600g motor: 540

Acceptance at prior application and race mornings of that day
When it reaches 40, the acceptance of the entry is closed.
Entry fee 2,000 yen

Even the third 1st place prize + extra prize yen (The prize is the enjoyment until that day) the each class place is a commendation full dress Howard race progress all classes.
One final heat five minutes (time of surroundings race)
The SC class must use the body for SC. The wing addition that the limitation is not in the decoration to the body is improper.

More information and how to sign up can be found here:

bignuts.weblogs.jp (translated to English)

Short course trucks have become class leaders at many tracks around the nation. What’s more is there’s a class for everyone. Stock class requires you to run stock tires while mod classes pretty much allow you to run whatever you want. Well, for those of you that want the most out of your short course truck, the 1:8 superstar Caliber tread design is ready for you to leave stock in the dirt.

The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Combining the Caliber with the Renegade, Pro-Line is changing it up with another bold new option for all the Slash® with ProTrac™ Suspension Kit and SC10 owners. The Pro-Line Renegade wheels feature a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. The detailed beadloc and lug nut hardware also adds to the realism.

SC10 owners use this wheel and tire combo on the front and rear! Just use the 12mm adapter kit #6064-05 on the rear and the #6064-05 with the new front inboard hub 6068-00.

Glued by the Pros here at Pro-Line, the new Caliber Premounts also include closed cell inserts for the all-time best loamy track action!

When you are ready to take your ProTrac™ Slash® or SC10 to the next level, then check out the Street Fighter Premounts.

Test Results:
“The Caliber SC tire is an aggressive tire used in nearly all conditions, it hooks my truck up and gives me the fast reaction I need to slice and dice my way around traffic in the short course class!” ~ Pro-Line Team Driver, Chad Bradley

Tire Features:

• Dual-stage pin design for exceptional tread life
• Small top pin for light to heavy loose dirt
• Base pin extraordinary on hard-packed/blue-groove surfaces
• Square-lug technology throughout the tread design
• Non-directional tread design
• Internal sidewall ribbing for lateral support and increased cornering control
• Made from M2 (Medium) compound

Wheel Features:

• Lightweight one-piece design
• 2.2″ outer bead and 3.0″ inner bead
• Simulated Bead-Loc ring
• Wheel made from high-strength, durable DuPont nylon material
• 10 Spoke design for increased rigidity

Foam Features:

• Matches the contour of the SC tire profile
• High density, reusable and waterproof
• Perfectly balanced
• Extremely durable
• Light weight
• Made 100% in the USA

What’s Included:

• Caliber SC tires mounted on ProTrac™ Suspension Kit Renegade Black wheels (2 pcs)
• Includes Closed Cell Inserts Inside (2 pcs)

Search:
1156-18 | Caliber SC M2 (Medium) Mounted on ProTrac Renegade Black Wheels

Travel back with JConcepts to a time when a truck was just a truck. Purpose built, no frills or luxury, just built Ford tough. Officially licensed by Ford, JConcepts introduces the 1979 Ford F-250 Ranger SCT body. Built as they were in the good ole days, JConcepts has brought an essence of the 1979 truck together with the latest offerings in competitive Short Course Racing.

With detailed 70’s styling, the hood scoop immediately is a standout retro feature which lends itself to the grill, fender and authentic 70’s cab styling. JConcepts left no detail untouched on bringing this old / new theme to the SCT crowd and most notably the rear roll bars and front to back horizontal body lines that give the “79” unmatched SCT realism.

Like all JConcepts bodies, performance is always a top priority and the 1979 does not stop short in performance. The 1979 stance has been optimized utilizing dimensional aspects of the other popular JConcepts bodies, the Manta and Raptor SVT. If you want to get tough, look mean and attack the track with a fearless abandon, than jump into the time machine with JConcepts.

Features:

• Fits Slash, Slash 4×4, SC10 and other similar SCT’s
• Officially licensed by Ford to JConcepts
• 1979 scale inspired body, cab and window design
• 1:1 headlight and grill treatment with pronounced rear roll bar
• Front and rear fender flares for maximum realism
• Standard cab with recessed windows
• Clear heavy-duty polycarbonate with protective film
• Window masks and detailed 1979 Ford F-250 decal sheet

Illuzion – Slash, Slash 4×4, SC10 – 1979 Ford Ranger F-250 body
Part # – 0208
Retail price – $42.00
(Fits Slash, Slash 4×4, SC10 and other similar SCT’s)

Raptor SVT SCT-R (O.S.F.M.)

One size fits all, or in some cases one size fits most is more appropriate. JConcepts introduces the one size fits most ROAR National Champion winning, Ford Raptor SVT body. With an ever increasing number of SCT trucks on the market a need for a body that is extremely versatile is in demand. With no pre-determined marks, JConcepts hits demand with the popular Raptor SVT SCT-R body. With confirmed placement on the Slash, Slash 4×4, SC10, Blitz, Ultima SC, Losi XXX-SCT and Hobao | OFNA Hyper SC, when it comes to the Raptor SVT body, being versatile is an understatement.

Get ready, JConcepts has reached new ground with the Short Course version of the popular Ford Raptor SVT body for competition Short Course racing. JConcepts has hung the acronym SCT-R on the new body with the R giving it racing credibility. Officially licensed by Ford, the JConcepts Ford Raptor SVT body is inspired from the ground up as an all-out SCT race body.

The Raptor SVT – F-150 body by JConcepts begins with the latest in 1:1 truck detail by incorporating the latest treatment in grill and headlight design, adding street appeal. Front and rear fender flares provide the clearance necessary to run an assortment of tires and wheels while maintaining that exclusive design and look.

Extended cab design with recessed side windows, louvers along the front hood highlight a number of the front-end styling cues. Deep recessed trim-out locations along the hood and bed area provide ample space for air relief cut-outs which reduce the parachute / blow-over affect that is so common in Short Course racing. Short course inspired bed area with incredible detail finish off this extraordinary, tough design.

Maintaining that exclusive performance and feel is critical to a vehicles performance, JConcepts is world proven innovation and design.

Features:

• Fits most all 1/10th SCT’s
• Officially licensed by Ford to JConcepts
• Scale inspired body, cab and window design
• 1:1 headlight and grill treatment
• Front and rear fender flares for maximum clearance
• Extended cab with recessed windows
• Clear polycarbonate with protective film
• Window masks and detailed Ford Raptor SVT decal sheet

Illuzion – SCT – Ford Raptor SVT – SCT-R body (O.S.F.M.)
Part # – 0215
Retail price – $42.00
(Fits most all 1/10th SCT)

New from Exotek Racing is this heavy duty alloy chassis brace for the HPI BLITZ. This brace strengthens the known weakest point in the chassis and protects the front of the chassis from cracking or snapping in half. A quick and simple way to bullet-proof your race ride.

AVAILABLE IN ORANGE OR BLACK.

Source: Exotek Racing

This is a set of Grey Supplemental Foam Inserts (4) for Traxxas® Stock Wheels. Offered for those who are using conical/tapered 2.2″/3.0″ SC wheels, Pro-Line now offers a supplemental insert that fills the gap created by the stock Traxxas style tapered wheel when using standard Pro-Line Tires & Inserts.

Features:

• Die cut insert fills the void created by the stock Traxxas style tapered wheel when standard Pro-Line SC tire/insert combos are mounted.
• Reusable
• Light weight
• Made 100% in the USA

What’s included:

• Die cut supplemental inserts (4 pcs)

Search:
6115-06 | Gray Supplemental Foam Inserts

Pro-Line has just released their latest tire for Shortcourse Racing: The Slicer SC. The  Slicer  SC 6-Rib front tire provides the best steering on all types of track conditions. You too can feel the same control on your Short Course truck. Perfect for the Slash, Slash 4×4, SC10, Ultima SC & Blitz/Blitz ESE.

Features:

• Re-useable Closed Cell foam inserts
• 6 rib design for explosive steering
• 2.2″ outer bead and 3.0″ inner bead
• Works on glueable wheels and Pro-Line Bead-Loc wheels
• Pro-Line branded laser etched sidewall detail
• Made in the USA

What’s Included:

• Slicer SC tires (2 pcs)
• Closed Cell inserts (2 pcs)

Part Number: 1168-01 | M2 (Medium)

JConcepts is assisting in making Short Course Trucks easier to drive. For the first several years of Short Course racing, the only option for tuning front tires on 2wd SCT trucks has been to use a rear tire. JConcepts is the first to introduce the Carvers directional ribbed front tire to Short Course Racing. The advantage of the Carvers tire is the ability to tune steering response by utilizing a radial rib to present the tire compounds to the racing surface.

Typically, ribbed tires net a less aggressive and more predictable front end response which can ultimately deliver faster and more consistent races. With the 2.2” x 3.0” design, the large sidewall retains the realism of the class while providing an additional tuning option. The Carvers front tire is perfect for a variety of track surfaces. The sharp angular and directional ribs provide the ultimate in control and direction on the most common dry and wet condition surfaces. The compact tire body combined with the JConcepts firm profiled inserts allow for precise steering input and response for the most consistent laps times available. Carvers in new condition excel on low traction surfaces as well as high “loamy” traction and wet surfaces where no rubber has been taken into the racing surface. Worn Carvers excel on indoor or outdoor clay tracks where a light blue groove has formed.

Features:

* Available in Super Soft (Green), and Soon – Soft (Blue), Indoor Soft (Gold) compounds.

* Compact tire body

* Sharp angular and directional ribs with precise separation

* Includes firm profiled “closed cell” inserts

Add this slick High Performance Aluminum Steering Rack Set to your Blitz short course racing truck for awesome cool looks and dramatically improved durability. Perfect for bashers with high-power motors to prevent breakages, and ideal for serious racers who need precise steering on all types of surfaces!

Five steering link holes are provided on the drag link for super-precise steering angle adjustment, plus the set is fully equipped with low-drag ball bearings for ultimate efficiency.

With the subdued brown anodizing, this makes an ideal upgrade for the Blitz ESE also!

Available from HPI Racing

ST Racing Concepts has released their new HD Front and rear skid plates. The CNC Machined HD front and Rear bumper/skid plates add great looks and increased durability to the front and rear end of your HPI Blitz RTR or ESE.  These skid plates are machined from a solid block of aluminum and can handle any abuse from racing to bashing, while still allowing the front and rear bumper to flex.  They also add great looks and realism to your truck.

Available in Orange, Gun Metal, Silver and limited edition Red anodizing.

STH103328FGM/O/R/S CNC Machined HD Aluminum Front Skid Plate for HPI Blitz RTR, ESE.  MSRP: $18.99

STH103328RGM/O/R/S CNC Machined HD Aluminum Rear Skid Plate for HPI Blitz RTR, ESE.  MSRP: $17.99

ST Racing Concepts CNC Machined Aluminum hex adapters (4 pcs set)

While the HPI Blitz comes with cast aluminum hex adapters, feedback from customers was that they can crack under heavy load or over-tightening of the set-screw.  Our CNC Machined aluminum hex adapters offers more durability while adding that final touch to the looks of your Blitz, matching the colors of our existing option parts for this truck.  Available in Orange, Gun Metal, Silver and limited edition Red anodizing.  

STH103362GM/O/R/S CNC Machined Aluminum Hex Adapter 4 pcs Set for HPI Blitz RTR, ESE.  MSRP: $17.99

Available from: www.teamstrc.com

This is a VW Full Fender Baja Bug Clear Body. The Baja Bug is officially licensed by Volkswagen back with the same style, quality, and features as it had the first time around and now a full fender version for SC. When you’re looking to outfit your Slash 2WD or Slash 4×4 truck with the coolest, most durable, long-lasting body shells, then check out Pro-Line’s complete line of Volkswagen Baja Bug bodies.

Features:

• Made from durable/genuine .040 Lexan
• Classic VW bug styling with Baja flair
• Simulated rear engine detail just like the stock motor
• Achieve a new look with optional add on spoiler
• Detail decal sheet with genuine Pro-Line’sponsors
• Paint-then-peel overspray film included
• Officially licensed by Volkswagen

Special Instructions:

• Download #3238 Instruction Sheet
• Side bars will need to be removed if you want to run the Baja Bug Body
• Tape inside of body at chassis sides to better protect against paint damage
• Shown without rear bumper. The rear bumper is accepted but part of engine detail will need to be removed to clear the mounts.

What’s Included:

• Clear VW Baja Body
• Spoiler (molded into the lexan)
• Spoiler mounting hardware
• Decal Sheet
• Window Mask

Search:
3238-63 | VW Full Fender Baja Bug Clear Body

Click here to goto the giveaway thread and enter.

Goose Bumps – green compound – black wheel – (SC10 front pre-mounted)
Part # – 3041-3210
UPC Code – 845937004840
Retail price – $35.00
(fits SC10 front)

Goose Bumps – green compound – black wheel – (SC10 rear pre-mounted)
Part # – 3041-3220
UPC Code – 845937004857
Retail price – $35.00
(fits SC10 rear)

Subcultures – green compound – black wheel – (SC10 front pre-mounted)
Part # – 3042-3210
UPC Code – 845937004864
Retail price – $35.00
(fits SC10 front)

Subcultures – green compound – black wheel – (SC10 rear pre-mounted)
Part # – 3042-3220
UPC Code – 845937004871
Retail price – $35.00
(fits SC10 rear)

Subcultures – green compound – black wheel – (Slash front pre-mounted)
Part # – 3042-3230
UPC Code – 845937004888
Retail price – $35.00
(fits Slash Front)

Subcultures – green compound – black wheel – pre-mounted 12mm hex SCT front and rear
Part # – 3042-3240
UPC Code – 845937004895
Retail price – $35.00

Fits:

• Slash 2wd rear
• Blitz F&R
• Slash 4×4 F&R
• Kyosho Ultima SC F&R
• OFNA Hyper SC F&R
• Jammin SCRT-10

Double Dees – green compound – black wheel – (SC10 front pre-mounted)
Part # – 3043-3210
UPC Code – 845937004901
Retail price – $35.00
(fits SC10 front)

Double Dees – green compound – black wheel – (SC10 rear pre-mounted)
Part # – 3043-3220
UPC Code – 845937004918
Retail price – $35.00
(fits SC10 rear)

Double Dees – green compound – black wheel – (Slash front pre-mounted)
Part # – 3043-3230
UPC Code – 845937004925
Retail price – $35.00
(fits Slash front)

Double Dees – green compound – black wheel – pre-mounted 12mm hex SCT front and rear
Part # – 3043-3240
UPC Code – 845937004932
Retail price – $35.00

Fits:

• Slash 2wd rear
• Blitz F&R
• Slash 4×4 F&R
• Kyosho Ultima SC F&R
• OFNA Hyper SC F&R
• Jammin SCRT-10

Bar Codes – green compound – black wheel – (SC10 front pre-mounted)
Part # – 3044-3210
UPC Code – 845937004949
Retail price – $35.00
(fits SC10 front)

Bar Codes – green compound – black wheel – (SC10 rear pre-mounted)
Part # – 3044-3220
UPC Code – 845937004956
Retail price – $35.00
(fits SC10 rear)

Bar Codes – green compound – black wheel – (Slash front pre-mounted)
Part # – 3044-3230
UPC Code – 845937004963
Retail price – $35.00
(fits Slash front)

Bar Codes – green compound – black wheel – pre-mounted 12mm hex SCT front and rear
Part # – 3044-3240
UPC Code – 845937004970
Retail price – $35.00

Fits:
Slash 2wd rear
Blitz F&R
Slash 4×4 F&R
Kyosho Ultima SC F&R
OFNA Hyper SC F&R
Jammin SCRT-10

Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a “T”. That’s right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track…

Wheel Features:

• Lightweight one-piece design
• 2.2″ outer bead and 3.0″ inner bead
• Simulated Bead-Loc ring
• Wheel made from high-strength, durable DuPont nylon material
• 10 Spoke design for increased rigitity

What’s Included:

• Renegade SC wheels (2 pcs)

This kit provides a direct fit of PowerStroke shocks to Ultima SC, SC10 and Blitz. The included Delrin pivot balls also provide superior PowerStroke shock mounting to Slash® and Slash® 4×4, allowing quicker shock removal and eliminating the dreaded screw back-out.

Features:

• High quality 3mm hardware
• Machined Delrin pivot balls for smooth action
• Universal kit can be used on a wide veriety of SC trucks
• PowerStroke SC Shocks (#6063-00 Front, #6063-01 Rear)

What’s included:

• Delrin Pivot Balls (4)
• M3x25 SHCS Screws (4)
• M3x30 SHCS Screws (4)
• M3 Locknuts (4)
• M3 Nuts (4)
• M3 Washers (4)

Both braces are designed to increase chassis strength and rigidity in fore and aft sections of the chassis.

rear brace (no hardware) = 31 g.
front brace (no hardware) = 19g.”

Front Chassis brace / servo mount

Rear Chassis Brace

Just imagine that you have landed a sponsor in the high tech weapons industry. Money is no object! You have chosen to build the ultimate open class race vehicle resembling a military strike fighter. The vehicles cab is an off the shelf reconnaissance vehicle, you then hang race inspired composite fenders to clear the oversized race tires and massive suspension travel. The back of your vehicle has been enclosed with aluminum quick release panels to hide the spare tires, fuel cell and oil coolers.

Large cooling fans are exposed to relieve the heat that the 900HP drive train produces but are protected by a sleek tubular cage. A final touch is the full width roof mounted light bar consisting of 6 high output HID lights that are perfect for targeting the next victim.

So what are you going to call it ………….. “Team Desert Militia”

Features:

• Bold unlimited off road styling ready to convert your Short Course (SC) truck into a high performance open class assault vehicle
• Unique design represents an unlimited racer that would be threat at any event.
• Made with Crystal Clear Genuine GE Lexan
• Four step to Race Ready:
  1.) Clean Body and apply included window mask
  2.) Paint then peel the over-spray film off
  3.) Sticker your body (decal sheet included)
  4.) Mount onto your Slash®, Slash® 4×4, Ultima SC, SC10 (with trimming) and Blitz (with trimming)
• Made in the USA

What’s Included:

• Clear Desert Militia Body
• Window masks
• Militia Decal sheet

Search:
3341-00 | Desert Militia

www.PROLINERACING.com

Description