This is a pair of ProTrac™ F-11 SC 2.2”/3.0” Bead-Loc wheels. Welcome to the future of Short Course – Meet the new wheel that will take you there: F-11 ProTrac™ Bead-Loc! Continue reading
This is a pair of Pin Point SC Carpet Tires. Indoor Carpet Off-Road Racing is a growing segment of the racing scene and Pro-Line is ready to take over with the new Pin Point SC Tire. Continue reading
The 1/18-scale Torment™ from ECX® builds on the legacy of the bigger, 1/10-scale version and packs in all the short course fun and action you love into a smaller package. Continue reading
Pro-Line have announced the release of their Pro-2 SC kit combing their highest quality and best performing SC accessories into one box to create the ultimate Short Course Truck. The Pro-2 SC Performance Chassis is 3mm thick Hard Anodized 7075-T6 aluminium and extends the full length of the truck for maximum durability and keeps everything in-line and extremely low for optimum performance. Continue reading
Horizon Hobby introduce the Dynamite Fuze 1/10 4-pole brushless motor and speed controller combos. They include a splash waterproof Fuze 70A speedo that comes pre-wired with EC3 battery and bullet-type motor connectors while an add-on heatsink lowers the ESC’s temperatures when the going gets tough. Continue reading
MIP Pucks™ Drive System, Center, TLR SCTE 2.0, MIP Pro4mance™ Pack is a low rotating mass center drive system made from 7075-T6 Aluminum. This drive system removes half the weight out of the rotating mass, resulting in higher acceleration and deceleration. The New MIP Pucks™ Drive System is like a 10th degree ninja master – whisper quiet with no backlash! With these New MIP Pucks™ Drive System you can sneak up on a cheetah and then out run it down the field!!! Continue reading
MIP introduce the Super Diff rebuild kit for the TLR SCTE 2.0 and MIP Pro4mance converted SCTE trucks. The set fits all trucks that make use of the TLR332001 diff case, it can increases diff life by more than five times Continue reading
Pro-Line introduce two new body shells in the form of the Evo SC for 1/10th short course trucks and the Bulldog Gen3 for Kyosho’s RB6 buggy. Starting with the SC body, it is designed to fit many of today’s trucks including the Traxxas Slash, Team Associated SC10, Losi XXX-SCT and SCTE as well as the Kyosho Ultima SC. Continue reading
MIP introduce the Pro4mance rigid chassis braces for the TLR SCTE 2.0 short course truck. They are made from 7075 aluminium and designed to improve chassis stiffness significantly. The bolt-in braces also do not wear out as the standard plastic parts do, for longer durability and a predictable chassis setup. Continue reading
2mm carbon fiber chassis stiffeners for the Team Associated SC10 series of vehicles.
Includes 18 4-40 x 3/16 counter sunk screws
Note: Requires a #43 drill bit and 4-40 tap for install Continue reading
1:10 Scale Ready-To-Run 4WD Electric Off Road Race Truck
4WD Short Course Performance!
Team Associated’s SC10 4×4 Ready-To-Run is a scale replica of the short-course truck raced by Kyle LeDuc in the Lucas Oil Off Road Racing Series. Continue reading
1:10 Scale Ready-To-Run Electric Off Road Race Truck
Featuring the paint scheme of the truck raced by Eric Barron in the Lucas Oil Off Road Racing Series, the Toyota Racing SC10RS is a Ready-To-Run RC short course truck that features… Continue reading
JConcepts Hi-Flow SCT body is the 2011 and 2012 ROAR National Champion. Most successful SCT body is now available in Light Weight material. Continue reading
Pro-Line expand their line of extended body mounts for popular SC and monster trucks by variants for the Team Losi SCTE and XXX-SCT/22SCT as well as the Traxxas Maxx, Revo and Summit vehicles. The body mount kit includes adjustable body… Continue reading
Designed for all 22-series vehicles such as the 22 buggy, 22T stadium and the 22SCT short course truck are these rear aluminium hub carriers from Team Losi Racing. They sport an updated design over the previous version and now feature… Continue reading
It’s hard to make an improvement to the race proven B4.2 buggy. However, JConcepts has pulled another option out from under their design sleeves with a genuine Carbon Fiber steering rack and hardware kit. Continue reading
1:10 Scale Ready-To-Run Electric Off Road Race Truck
3-Time R.O.A.R. Short Course National Champion!
The Team Associated’s SC10RS (Race-Spec) has what it takes to be a champion with the proven performance of winning the 2010, 2011 and 2012 R.O.A.R.… Continue reading
3mm carbon fiber steering rack for the Team Associated B4, T4 and SC10 series of vehicles.
Includes all necessary mounting hardware. Two machined bushings, two 4-40 x 3/8 button head screws and two 4-40 lock nuts.
Continue reading
It’s long been known that suspension is critical for a vehicle’s handling on a track, but the internals of these shocks are often accepted blindly and stuck in old technology. Based on Full-Scale Valve Technology, this innovative MIP Bypass1™ Team… Continue reading