Attebery Performance Engineering - Machined Accessories

[ChrisAttebery]

I'm waiting for the parts to arrive so I can weigh them and the steel parts I rip out of my truck.

My guess is 20 grams, but we'll see.

[BlackDragon]

Originally Posted by 8ight

What is the weight savings vs a stock set of pins. weight with retainers that is vs the stock weight of the pins. (grams if possible) Thanks!
[/URL]

You will be replacing 322mm's of 3.5mm diameter heavy steel with Titanium thats roughly 50% as heavy as steel

This would be about the same as replacing the entire screw set with Ti.

Weight saving will be nearly the same as replacing the turnbuckles, but at less cost.

[bustanut666]

Originally Posted by ChrisAttebery

I'm waiting for the parts to arrive so I can weigh them and the steel parts I rip out of my truck.

My guess is 20 grams, but we'll see.

let us know when the hinge pins are in.. i might get a set..

thanks

[ChrisAttebery]

The math says 13.5g for the inner pins alone. The outer pins will drop another 3-4 g.

[ChrisAttebery]

Well, I guess I failed math class.

The stock pins weigh 25g. The Ti pins weigh 17.8g. Total weight loss is 7.2g.

[8ight]

Originally Posted by ChrisAttebery

Well, I guess I failed math class.

The stock pins weigh 25g. The Ti pins weigh 17.8g. Total weight loss is 7.2g.

If you found a different way to hold them besides those collars w/ grubs I bet the savings goes up a bunch.. to bad you couldn't use the stock e-clips.

[ChrisAttebery]

Well, I have a groove too for my lathe. I can put E-clips on the ends of them if you'd like. The collars and set screws weigh 4.1g. I can also cut about .8g off the pins. The e-clips will probably weigh .2g so I can probably get the weight down to 13.2g or so.

I'll get some clips this week and post up the results.

[ChrisAttebery]

I cut a set of e-clip grooves into my personal set of pins today. It shaved 4.4g off the set.

From now on this will be an option. If you'd like to use clips just let me know when you order.

[1472]

Got your hingpins Great product. Just wanted to know what size or if can link me where to get extra aluminum collars. Just want to have spares!

[ChrisAttebery]

Well, I have a few spares now that people are requesting e-clips instead.

Send me a PM with your real name and I'll drop a couple in the mail.

[bustanut666]

Will the hinge pin come with any extra e clips just in case they go flying off?? or are those easy to find at LHS...

[ChrisAttebery]

I believe I threw a couple spares in the bag. You can get them at any decent HW store. They are 9/64".

[ChrisAttebery]

OK guys,

In order to get a reasonable price for the Spring Adapters I had to buy a ton of them. I'd really like to see people start using them as I'm sure word of mouth would help them sell. So, I'm going to throw in FREE SHIPPING if you buy 2 or more sets. If you order 4 sets I'll pay shipping AND throw in the 4th set for FREE.

So the pricing is as follows:
1 set(four shocks): $15 shipped
2 sets(eight shocks): $20 shipped
4 sets(sixteen shocks): $30 shipped


Thanks,


Chris

[ChrisAttebery]

Guys,

I'm sold out of the Hinge Pin sets. Please do not send me payments for these.

Thanks,


Chris

[wolverine69]

Originally Posted by ChrisAttebery

Guys,

I'm sold out of the Hinge Pin sets. Please do not send me payments for these.

Thanks,


Chris

I would be interested in a set if you make a second go around.

[ChrisAttebery]

I've had enough requests that I've decided to do a run of ten sets. They will be first come first serve. Get them while you can. They should ship by the 27th of June.

SCTE, TEN and 810 Titanium Hinge Pin sets. The set will have 12 pieces: Front inner pins, Rear inner and outer pins, and e-clips for the rear outer pins. The pins will be long enough to use mudguards.

Each set will be $30 shipped first class.

Priority Mail for $5 per order.

Express Mail for $18 per order.

First Class shipping to Canada will be $4.


IMPORTANT NOTE: Please put "Hinge Pins" in the subject line of your PP payment.

Thanks,


Chris

[ChrisAttebery]

You can now order from my new website: www.ape-rc.com

[ChrisAttebery]

I'm going to be out of town next week. If you haven't placed you order by now it's not going to be shipped until the 18th.

Thanks,


Chris

[jwemail]

hi chris, great products ur setting us up with. i had one ?, are u going to be stocking up on hingpins, or is that all she wrote. i wanted to get the cf pin holders from snr, but if u r not going to have stock in pins ill wait for a better option. thanks chris. u are the man

[ChrisAttebery]

I'm working on it. I hope to know more in a day or two.