Xtreme racing carbon fiber shock towers - Page 2

kurtus420 · 07-28-2010, 04:11 PM

No, they are all the same 3mm thickness just different finishes.

Matt Sunderlage · 07-28-2010, 11:57 PM

Quote:

Originally Posted by kurtus420

Have you experienced any bending out of the strc units Matt? I noticed you just started running outdoors with your Hyper so have you been hitting big jumps like 1/8th scale with them? Also just wanted to thank you for all your post about your setups, it's been mighty helpful man.

You'd have to do some insane wrecking do do anything to the STRC units. Once you have them in your hand you'll see what I mean.

No problem!

My friend has driven his Hyper outside (basically my set-up) a few times and it's like driving a slot car, no problem keeping up with 1/8 scales. The Hyper really like JC Subcultures on loose/soft loamy dirt.

kurtus420 · 07-29-2010, 12:20 AM

I know what you mean Matt, this thing is not at all like driving my slash, I turn in the direction I want to go punch it and it just goes there rather than spinning out......it's like it's on rails!!

kurtus420 · 07-29-2010, 01:22 PM

I just got an email directly from Bruce Sayre and I have to take back every bad thing that I have said about xtremerc, he has asked me to resend the images because they were spam filtered and that is handle out of house so I now have his direct email and hopefully he will get them now. Please note that this was all a misunderstanding and once he got my message on the machine he went out of his way to find whatever he could.

Looks like I'm the ----head in all this and I hope that you all just call them directly in the future so that you don't handle it as bad as I did

. I am so sorry Xtremerc, you will get me back as a customer for sure.

PS, still waiting on the outcome of if I'll get a replacement but it is nice to be acknowledged at least at thats good enough for me.

RCblaze · 07-29-2010, 02:32 PM

+1

kurtus420 · 07-30-2010, 07:04 AM

Good news guys, I got an email this morning from Bruce and all it said was "Kurt, whats your address and I'll send out a new one". I am so happy words can't describe!! Thanks Bruce

kurtus420 · 08-17-2010, 11:42 AM

Got the new tower today, thanks again Bruce for hooking me up!!! Now I think I might have to buy one of their lcg chassis my my slash..........good support sure makes these decisions easier but just remember to call and talk to them rather than relying on emails!!

kurtus420 · 08-17-2010, 02:20 PM

Just ordered my g10 lcg chassis for my slash but I'll save that for the slash thread!!

discgolferlee · 08-17-2010, 09:21 PM

camos are same thickness and mine have been bulletproof!!

07-28-2010, 04:11 PM	#21
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	No, they are all the same 3mm thickness just different finishes. __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

07-29-2010, 12:20 AM	#23
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	I know what you mean Matt, this thing is not at all like driving my slash, I turn in the direction I want to go punch it and it just goes there rather than spinning out......it's like it's on rails!! __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

07-29-2010, 01:22 PM	#24
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	I just got an email directly from Bruce Sayre and I have to take back every bad thing that I have said about xtremerc, he has asked me to resend the images because they were spam filtered and that is handle out of house so I now have his direct email and hopefully he will get them now. Please note that this was all a misunderstanding and once he got my message on the machine he went out of his way to find whatever he could. Looks like I'm the ----head in all this and I hope that you all just call them directly in the future so that you don't handle it as bad as I did. I am so sorry Xtremerc, you will get me back as a customer for sure. PS, still waiting on the outcome of if I'll get a replacement but it is nice to be acknowledged at least at thats good enough for me. __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

07-29-2010, 02:32 PM	#25
RCblaze Racer Join Date: Mar 2010 Location: Minneaoplis Posts: 178	+1 __________________ www.rcspeedzone.com

07-30-2010, 07:04 AM	#26
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	Good news guys, I got an email this morning from Bruce and all it said was "Kurt, whats your address and I'll send out a new one". I am so happy words can't describe!! Thanks Bruce __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

08-17-2010, 11:42 AM	#27
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	Got the new tower today, thanks again Bruce for hooking me up!!! Now I think I might have to buy one of their lcg chassis my my slash..........good support sure makes these decisions easier but just remember to call and talk to them rather than relying on emails!! __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

08-17-2010, 02:20 PM	#28
kurtus420 Basher Join Date: Apr 2010 Location: Nanaimo, BC (Vancouver Island) Posts: 85	Just ordered my g10 lcg chassis for my slash but I'll save that for the slash thread!! __________________ Hyper 10sc, Slash, heli's, planes, and crawlers just need a scaler!!!!!

08-17-2010, 09:21 PM	#29
discgolferlee Addict Join Date: Dec 2009 Location: adrian, mi Posts: 531	camos are same thickness and mine have been bulletproof!! __________________ Ofna Hyper 10sc mmpro 5700kv HPI Blitz ESE novak 10.5

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links