Mamba Monster receiver wiring

[jake]

I had alittle too much fun jumping my sc8e at pismo dunes... Jumped wrong landed upside town forcing the mamba monster top case to rip off the bottom case pulling the receiver wires off the board. I just wanted to know if anyone has pictures of how the receiver wires are soldered on the board. Ill either solder the wires on or have the electric engineering guys at work do it.

[Hampton]

Did the samething last weekend.Just sent mind back to castle it pulled the tabs off the board no fixing that.

[jake]

My taps are not ripped of the board the wires broke at the solder joints. It will be fixable if I can figure out which wire goes where.

[jake]

Fixed it!!!Oh ya. re soldered the wires to the board. Wires solder on the board left to right(orange,red,brown).

[agarabaghi]

congrats on voiding your warranty.

[jhtoy]

Originally Posted by agarabaghi

congrats on voiding your warranty.

Who cares, it's fixed and he didn't have to wait three weeks to get it back.I use a zip tie around mine to help hold it together,Traxxas also makes a esc mount for the MMM.Good job on fixing it yourself,those wires are awfully small and very close together!

[jake]

Originally Posted by agarabaghi

congrats on voiding your warranty.

What warranty, I bought it used and its two years old.

Who cares, it's fixed and he didn't have to wait three weeks to get it back.I use a zip tie around mine to help hold it together,Traxxas also makes a esc mount for the MMM.Good job on fixing it yourself,those wires are awfully small and very close together!

Thanks, I figured it was worth giving it a try, rather then sending it to them and paying the money...I will probably zip tie it for now and buy the esc mount soon.