| |
09-08-2011, 11:47 AM
| #1 |
| Basher Join Date: Sep 2009 Location: Nebraska
Posts: 61
|  4WD 1/5 SCT from...... LOSI Categories - Cars, Products, Team Losi - trackback Losi have introduced their new 1/5-scale 5ive-T 4wd Offroad racing truck, the closest thing to a full-size vehicle in realism, performance and experience. It features a 4WD drivetrain based on the racing-winning, award winning 8ight platform, Spektrum telemetry receiver, installed sensors and 1/4-scale servos. And since it’s a Bind-N-Drive vehicle, you complete it with the DSM transmitter of your choice. These large-bore threaded, aluminium shocks feature over-sized 7mm shock shafts designed to stand up to the punishment of 1/5-scale action. The threaded adjusters allow for fine-tuning of the ride you are looking to achieve. The extra high volume of fluid is essential in controlling the suspension movement over the roughest terrain.(Far right: 1/5-scale and a standard 1/10-scale shock shaft) This is no ordinary chassis. It is based on the award winning, race-proven 8ight Platform. It has been designed to produce the best performance possible. The chassis plate is constructed of 5mm aircraft-grade aluminium and has been machined to save weight and add strength to provide extreme durability. To ensure a long engine life and proper care, the air and fuel systems are served by a two-stage filtering systems. The air must pass through two different foam filters designed to block as much dust and debris as possible while still maintaining proper flow. The fuel system features a secondary filter that serves multiple purposes. One, to keep the fuel pickup in the gas mix no matter the orientation of the vehicle and as a filter to block larger debris and a secondary bullet style filter to catch anything else. The engine comes preinstalled with a high-volume muffler and features an electronic ignition, easy adjust carburetor with a built-in choke and fuel primmer. An added bonus is the machined oval inserts that match the chassis cutouts precisely to locate the engine for proper gear mesh. The finned aluminium clutch mount adds strength and durability and provides unmatched heat dissipation for increased longevity of the 8,000 RPM clutch. Since it is enclosed, it prevents dirt and debris from entering and fouling the parts. The oversized bearings handle greater loads and are more reliable. The throttle servo performs more than just throttle duties it is also the main source for braking power. This heavy-duty large-scale servo has the power to bring the 5ive-T to a stop thanks to the functionality of the bias adjustable dual-disk brakes. No 1/10-scale throttle servos here. The core of the electronics system is the SR3300T receiver that is powered by Spektrum 2.4GHz DSM technology and has telemetry built in. The 5ive-T comes prewired with sensors for engine temperature, speed and receiver battery voltage. Just add a surface DSM transmitter like the Spektrum DX3S, and all of this information will be transmitted back to the driver for real-time vitals of the 5ive-T. These monster wheels are true beadlock wheels with rings on both the inner and outer bead of the tire. With the amount of power the 5ive-T produces and the sheer size of these tyres, these wheels will provide a stable platform for the all-terrain tires. Many popular 1/5-scale tires will mount right on these beadlock wheels. The 5ive-T uses nothing but precision cut or formed, heat treated steel gears throughout the drive train. No plastic gears. These are the strongest and most durable type of gears available and expensive option items on other models. The realistic cage provides added durability to the assembly absorbing impacts as well as a solid base for the modular body. The unique design allows the body and cage to be removed with only four screws and four body clips in seconds. The four-piece body individual panels to be replaced in the event that it becomes damaged so an entire body does not need to be purchased to get the vehicle back to the factory look. Clear panels and stickers are sold separately to create your own look or retain the factory schemes. Features Specifications |
|  |
| Sponsored Links | |
| | |
|
09-08-2011, 02:05 PM
| #2 |
| Support RCSC, buy a Star!   Join Date: Jul 2009 Location: Milwaukee,WI
Posts: 4,306
| ...um, yes please.    I hate living in the city.  |
|
| |
|
09-08-2011, 02:12 PM
| #3 |
| Racer Join Date: Jul 2009
Posts: 162
| Looks like more fun than my ten scte.  |
| |
|
09-08-2011, 02:51 PM
| #4 |
| World Domination Tour!  Join Date: May 2009 Location: Imitation is the sincerest form of flattery!
Posts: 3,188
| Pretty cool! |
|
| |
|
09-08-2011, 03:07 PM
| #5 |
| Racer Join Date: Jun 2009
Posts: 191
| I've known about this for a while,can't wait to get my hands on one!!! |
|
| |
|
09-08-2011, 04:43 PM
| #6 |
| Newbie Join Date: Mar 2010
Posts: 8
| this if sick !!!!!!!! http://www.youtube.com/watch?v=JN7XUFlS5PI |
|
| |
|
09-08-2011, 05:18 PM
| #7 |
| Newbie Join Date: Mar 2010
Posts: 8
| |
|
| |
|
09-08-2011, 08:16 PM
| #8 |
| Racer Join Date: May 2011 Location: MA
Posts: 164
| Hpi just released a 1/5 4x4 no specs yet tho |
|
| |
|
09-08-2011, 08:27 PM
| #9 | |
| Newbie Join Date: Mar 2010
Posts: 8
| Quote:
I dont know hpi, but the losi 5t look awsome with the suspention set up just like the 8t and 8b and the sct it is goin to be a killer machine at leas for the track !!! | |
|
| |
|
09-08-2011, 08:45 PM
| #10 |
| Racer Join Date: May 2011 Location: MA
Posts: 164
| ya the losi looks sick Ive been thinking what my next rc was going to be and this is sick |
|
| |
|
09-09-2011, 06:55 AM
| #11 |
| Racer Join Date: Sep 2010 Location: aubrey, tx
Posts: 198
| OH HELLZ YES! Me wants! Dang, sucks being unemployed right now. =( Maybe I can ask Santa....hmmmm Amainhobbies.com has the arrival date set at October 5th. Last edited by jonnydigital; 09-09-2011 at 06:57 AM. |
|
| |
|
09-09-2011, 08:25 AM
| #12 | |
| Racer Join Date: Feb 2011
Posts: 175
| Quote:
| |
|
| |
|
09-09-2011, 08:33 AM
| #13 |
| Basher Join Date: Aug 2011
Posts: 69
| they just "released" the info. lol |
|
| |
|
09-09-2011, 01:01 PM
| #14 |
| Addict Join Date: Feb 2011 Location: Vancouver Island
Posts: 544
| Wow thats a big one at 30+pounds, must be hella smooth to drive, it would be cool to see a track full of those things going at it |
|
| |
|
09-09-2011, 03:04 PM
| #15 | |
| Racer Join Date: May 2011 Location: MA
Posts: 164
| Quote:
| |
|
| |
|
09-10-2011, 10:08 AM
| #16 |
| Basher Join Date: Apr 2010
Posts: 53
| Looks really awesome!!! With a brushless motor it would be perfect |
|
| |
|
09-10-2011, 03:36 PM
| #17 |
| SC Specialist  Join Date: Nov 2009 Location: Seattle
Posts: 2,082
| I want to see one of those run over a SC8! |
|
| |
|
09-11-2011, 10:18 PM
| #18 | |
| Addict Join Date: Dec 2009 Location: Chino, CA
Posts: 602
| Quote:
| |
|
| |
|
09-13-2011, 06:11 PM
| #19 |
| Addict Join Date: Feb 2010 Location: Barstow, Ca.
Posts: 245
| So is this going to be as big as the Hpi 1:5 or on the smaller side like a SC8 since it is based of a 1:8 buggy? Edit: ok, just read the specs. Looks like it is bigger than the Hpi. 65mm longer, 67 mm wider, 39mm longer wheelbase. Last edited by MojaveMonster; 09-13-2011 at 06:35 PM. |
|
| |
|
09-17-2011, 10:19 AM
| #20 |
| Racer Join Date: Aug 2009 Location: Bklyn All Day
Posts: 116
| I want this sooooo bad. |
|
| |
 |
| Thread Tools | |
| |
