Go Back   RCShortCourse.com Bulletin Board > ShortCourse & Desert Brand Specific Tech > HPI Mini-Trophy Desert Truck



Thread: dynamite fuze motor esc combo

LinkBack Thread Tools
Old 01-05-2011, 11:27 PM   #1
Join Date: Nov 2010
Posts: 23
Default dynamite fuze motor esc combo

anyone ever ran these?
seem cheap for the amount of kv's the motors have.
rider702 is offline   Reply With Quote
Sponsored Links
Old 01-21-2011, 03:41 PM   #2
Join Date: Dec 2010
Posts: 4

I'm using a fuze 5600 in mine and it works great. Fast but still very controllable. I think it's a good match.
I'm running a 5000mAh 2s 30c lipo. I'm still running stock gearing. It's definitely fast enough to be fun and very controllable but not rediculously fast like a vxl on 3s. The esc fits very snug right behind the motor. I just wedged it in there and haven't had any problems with it comming out at all, even after harsh crashes. The esc is really easy to dial in with the card that comes with it. I don't have anything bad to say about the fuze in the mtdt.
corndogg is offline   Reply With Quote
Old 04-03-2011, 09:13 PM   #3
Join Date: Feb 2010
Posts: 16

i have the 5800 kv one and i switch it between my mtdt and my blitz and it works great in both and is fine for the track and for bashing and doesnt get too warm for my conditions and driving styles
travis193 is offline   Reply With Quote
Old 04-06-2011, 12:34 AM   #4
Join Date: Jul 2010
Location: Fairfield, ca
Posts: 566

The esc is awesome. 3s on a 5800kv motor?! Fu€k yeah!!! Though depending on your trigger finger, the 5800 doesn't like the stock gearing that much. Gets HOT, I run mine 13-14/90 (flat irons) or 13/84 (stock tires). I can't say I've had a problem with it yet, though to get enough torque you have to run crazy gearing. If i had a chance to do it again, I'd get the 3300kv set up and a 22pinion to match.
Hvrc is offline   Reply With Quote
Old 08-18-2013, 08:25 AM   #5
Join Date: Jun 2013
Posts: 138
Default Re: dynamite fuze motor esc combo

are the fuze brushless motors rebuild able, can you replace the bearings. cause I got one that needs bearings or the is something dragging in it, I seen some where that these motors pick up dirt pretty easy

Last edited by kgb424; 08-18-2013 at 09:04 AM.
kgb424 is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -7. The time now is 03:09 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2007 RCShortcourse.com